Rail Sections
Low profile brass rail is hand-bendable and field-cuttable for a variety of configurations
End Cap
Finishes off the end of the rail
Live Rail Connector
Physically & electrically connects two rail sections
on same transformer
Isolating Rail Connector
Physically connects two rail sections, on separate transformers
» back to top
Rigid Standoff
For use with all power supplies. Includes dual height hardware, for either 2” or 4.75.”
Swivel Standoff
For use on sloped ceilings with all power supplies. Post is field-cuttable for height adjustment
Adjustable Cable Support
For longer drops, includes 5’ of cable. Recommended for use with minimal curves. Rail connection includes an adjustable cable retainer, for ease of use.
Extension Posts
Field-cuttable posts for longer suspensions on Besa standoffs (Rigid or Swivel)
T-Bar Clips:
All Besa standoffs and cable supports are compatible with standard T-Bar clips,
for use with suspended ceiling systems. Standard clips utilize a 1/4-20 threaded
post, 5/8” long.
» back to top
Surface Transformers*
Magnetic, 300W
Remote Transformers
Electronic 300W DC 10.375” L x 1.625” D x 1.875” H
Magnetic 300W 9.75” L x 4.25” D x 4” H
Remote Feed Canopy*
For use with Remote Transformer applications
Flexible Feed Cable
5 Ft of cable for longer reach (10AWG)
» back to top
Besa Quick-Connect Pendants and Spotlights are compatible with Besa Monorail and Quick-Connect Canopies. They are available from your dealer.
» back to top
» back to top